Dicor Lap Sealant Cure Time

Dicor Lap Sealant is an essential product for those who own recreational vehicles (RVs), travel trailers, and fifth wheels. It helps to protect the roof of the vehicle from water, dust, and debris. The lap sealant is a self-leveling sealant that forms a continuous, tough, and flexible barrier that provides an impermeable barrier against moisture and air. It is an important part of the maintenance of an RV and must be applied properly to ensure that it functions as intended.

One of the most important things to consider when using Dicor Lap Sealant is the cure time. The cure time is the time it takes for the sealant to reach its full strength and adhere properly to the surface. Improper cure time can result in a sealant that is not fully adhered to the surface and can lead to leaks, which can be costly to repair.

In this article, we will discuss everything you need to know about Dicor Lap Sealant cure time, including what it is, how to determine the cure time, and how to properly apply the sealant to ensure the best results.

What is Dicor Lap Sealant Cure Time?

The cure time of a sealant refers to the time it takes for the sealant to reach its full strength and adhere properly to the surface. During the cure time, the solvents in the sealant evaporate and the sealant hardens into a flexible and durable barrier. This process can take anywhere from 24 hours to a few days, depending on the conditions.

How to Determine the Cure Time of Dicor Lap Sealant

The cure time of Dicor Lap Sealant can be determined by a few different factors, including the temperature, humidity, and the type of surface the sealant is being applied to. Generally, the cure time for Dicor Lap Sealant is between 24-48 hours in ideal conditions. However, it can take up to 72 hours for the sealant to fully cure in less ideal conditions, such as high humidity or low temperatures.

It is important to note that the cure time can also be affected by the thickness of the sealant. If the sealant is applied in a thick layer, it may take longer for the solvents to evaporate and for the sealant to cure completely. In this case, it may be necessary to wait a few extra hours for the sealant to cure.

How to Properly Apply Dicor Lap Sealant

Applying Dicor Lap Sealant correctly is crucial to ensure that it cures properly and forms a strong and durable barrier. Below are some tips to help ensure the best results when applying the sealant:

  • Clean the surface: Before applying the sealant, it is important to clean the surface thoroughly to remove any dirt, debris, or grease. This will ensure that the sealant adheres properly to the surface.
  • Use a primer: Dicor recommends using a primer before applying the lap sealant. The primer will help the sealant adhere better to the surface and improve the overall durability of the sealant.
  • Apply the sealant: Apply the sealant in a continuous and steady stream along the entire length of the roof seam. Make sure to apply enough sealant to fill any gaps and ensure that the sealant is evenly spread over the surface.
  • Smooth out the sealant: Use a smoothing tool, such as a plastic spreader, to smooth out the sealant and ensure that it is evenly distributed over the surface.
  • Allow to cure: Allow the sealant to cure for the appropriate amount of time, as determined by the conditions and the thickness of the sealant. Do not walk on the roof or expose it to water until the sealant is fully cured.
  • Inspect the sealant: After the sealant has cured, inspect it to ensure that it has adhered properly to the surface and that there are no visible gaps or areas where the sealant has not been fully cured. If any issues are found, reapply the sealant and allow it to cure for an additional 24-48 hours.

Conclusion

Dicor Lap Sealant is an essential product for protecting the roof of your RV, travel trailer, or fifth wheel. Proper cure time is crucial to ensure that the sealant forms a strong and durable barrier that will protect your vehicle from water, dust, and debris. By following the tips outlined above, you can ensure that your Dicor Lap Sealant cures properly and provides the protection that you need.

Whether you are a seasoned RV owner or new to the world of recreational vehicles, it is important to take the time to understand the cure time of Dicor Lap Sealant and how to properly apply it. With the right knowledge and techniques, you can protect your investment and keep your RV in top condition for many years to come.